HS60 v2 Preorder

HS60 v2 Preorder




  • 60% SMD RGB Hotswap PCB

  • Compatible with QMK firmware

  • Will ship fully complete, with all components in place

  • Built and QA tested at a PCB Manufacturer and QA again in the UK

  • Fits all standard and aftermarket 60% cases.

  • V2 differences:

    • Addition of HHKB Layout PCB

    • ARM Processor (Instead of Atmel)

      • STM32F303 processor

      • ARM M4f core running at 72 Mhz

      • Runs QMK using Chibios ( a real time operating system)

      • it has 256kb of flash memory vs 32kb of the Atmel ( this allows the user to enable all possible options of QMK)

      • 40kb of SRAM vs 2.5kb of the Atmel ( this allows the OS to run which enables threading)

      • ISSI led driver for the RGB

      • QMK with almost all its features has been ported to ARM ( Plank uses an ARM processor as well). Yiancar is actively contributing to the development of the firmware.

      • Fully programmable through config.qmk.fm

    • Built and QA tested at a PCB Manufacturer and QA again in the UK

    • Matte Black PCB

If you are not in the US, please order from one of the proxies listed below. If you order from us to be shipped to another country, we may contact you about additional shipping costs. If your country is not available on our site or any of the other proxies, scroll down for a form to receive a custom shipping estimate to your location.

Because this is a pre-order, if you order this item with any other items, they will not ship separately. If you want your in-stock items to be sent separately, place a second order. Do not order this item with different groupbuy/pre-order product.

Please read our policies before ordering.

Add To Cart










Australia/NZ: Dailyclack

Canada: Mechkeys.ca

Europe: Mechboards.co.uk


Q1: What about other layouts?
A1: We now have ANSI, ISO, HHKB layouts. We’re sticking with standard layouts for now, as we can’t add multiple layouts to the same PCB as the hotswap sockets can’t overlap. Trying to cover all possible layouts would be impossible so it’s standard for now. if there are enough people wanting other layouts, we may look into them.

Q2: What happened to the upside down esc and 1 keys?
A2: It’s due to the placement of the USB connector following the universal GH60 standard. The hotswap sockets can’t fit otherwise!

Q3: Is it difficult to collect all the parts needed for a full keyboard and to put it together using this PCB?
A3: Any other 60% case you find that has standard mount holes, and any standard plate, will work with this PCB

Q4: Does it have underglow?
A4: No as the power draw for all the in-switch LED’s is quite high already. There are exposed pins to add underglow RGB strips, but this is experimental andup to the user.

Q4: Can I set the RGB?
A4: Yes! It comes with different styles as well as colour picker. QMK community is working toward a hosted software to do that as well but its still under development.

Q5: USB-C? or Mini
A5: Mini for now

Q6: Do i need diodes, resistors, etc?
A6: The board is fully complete and ready to go!